搜索
搜索
Your location:
Homepage
/
/
/
Pharmaceutical packaging should have the same status as drugs

Pharmaceutical packaging should have the same status as drugs

(Summary description)The main drafting unit of the "Twelfth Five-Year" development plan for the pharmaceutical industry

Pharmaceutical packaging should have the same status as drugs

(Summary description)The main drafting unit of the "Twelfth Five-Year" development plan for the pharmaceutical industry

Information

The main drafting unit of the "Twelfth Five-Year" development plan for the pharmaceutical industry——Relevant persons from the Pharmaceutical Division of the Consumer Goods Industry Department of the Ministry of Industry and Information Technology made a special trip to the China Pharmaceutical Packaging Association to solicit opinions on the drafting of the "Twelfth Five-Year Plan" development plan for the pharmaceutical industry and listen to it at the same time Packaging Association's "Twelfth Five-Year Plan" report on planning work. At the meeting, the Pharmaceutical Packaging Association called for pharmaceutical packaging to be placed on the same status as drugs.

  img

Relevant persons from the Ministry of Industry and Information Technology and the Ministry of Science and Technology introduced the preparation of the pharmaceutical industry's "Twelfth Five-Year Plan" and the "Twelfth Five-Year Plan" technology plan for the pharmaceutical industry and their suggestions at the meeting. Cai Hong, Secretary General of China Pharmaceutical Packaging Association Reported on the status quo of the development of the pharmaceutical packaging industry and suggestions on the “Twelfth Five-Year Plan”. According to her, as of this year, the total output value of the pharmaceutical packaging industry has reached 35 billion yuan, with 1,500 enterprises. Cai Hong said that during the "Eleventh Five-Year Plan" period, the proportion of the pharmaceutical packaging industry in the total output value of the pharmaceutical industry has shown a downward trend. At present, the output value of the pharmaceutical packaging material industry accounts for less than 10% of the total output value of the pharmaceutical industry, which is much lower than that of developed countries. % Around the level. At the same time, the pharmaceutical packaging industry has low profits, insufficient research and development capabilities, and all high-end technologies, products and equipment rely on imports. She believes that pharmaceutical packaging is an important part of the pharmaceutical industry. Packaging materials and containers that directly contact drugs are the basic elements of drugs and have an important impact on drug quality and drug safety. She urged that in the "Twelfth Five-Year Plan" for the pharmaceutical industry, pharmaceutical packaging should be placed in the same position as pharmaceuticals and developed simultaneously with pharmaceutical preparations. Policy support for the pharmaceutical packaging industry should be increased.

  img

Zhang Heyong, Honorary President of the China Pharmaceutical Packaging Association, said that my country is now implementing a new version of GMP to improve the quality of medicines. Pharmaceutical packaging must keep pace with the times, develop high-end products and meet the new requirements of the pharmaceutical industry. If there is no upgrade of the pharmaceutical packaging material industry, the pharmaceutical standards should be improved. And quality efforts will not be achieved.

img

The head of the Department of Biotechnology and Medicine of the Department of Social Development, Science and Technology of the Ministry of Science and Technology, relevant leaders of the China Pharmaceutical Packaging Association, experts from some pharmaceutical packaging material quality inspection institutions, pharmaceutical packaging companies and pharmaceutical manufacturers participated in the forum.

Welcome to Yangzhou Jerelpack Pharmaceutical New Material Co., Ltd.: www.jerelpack.com

Keyword:

Scan the QR code to read on your phone

Real-time News

img
Alu-Alu and Alu-Blister are two kinds of packaging method for food, medicine and nutrition industry especially for hard tablets and capsules. Then what is the difference between these two ways and how to choose the proper ways of packing for your own products, you may want to dig inside.
JEREL Pharma Pack will attend 2023 Algeria Maghreb Pharma Expo from February 5th to 7th with booth no. J21.   Jerel has been exporting pharma packing materials to North and South Africa since 2010. With over 10 years cooperation with African pharmaceutical companies and printing factories, Jerel has gain great support from Africa market.   It is the very first station that JEREL goes after 3 year of COVID-19, hope to see all new and old friends within this exhibition.   Contact person on booth: Skylar Min (email: skylarmin@jerelpack.com, whatsapp:86-13776425960) Spring Zhou (email: zc@jerelpack.com, whatsapp:86-13852707562)
As a supplier of pharmaceutical packaging materials that has always been export-oriented and supplemented by domestic sales, today we will talk to you about the differences in the procurement of pharmaceutical packaging materials for domestic and foreign customers!
There are several major producers of pharmaceutical packaging materials in the world, which basically monopolize the global pharmaceutical packaging material market, and each has a strong regional competitive advantage. Then China's pharmaceutical packaging materials go overseas, and even go to foreign high-end markets, what opportunities and challenges are there in the middle, let us take an inventory.
As early as before the COVID-19, after the trade war, production and the foundry of large factories began to move out of China, looking for new suppliers to produce large countries. Under such a premise, Vietnam's manufacturing industry has ushered in a new opportunity for development.
From the perspective of the international market, the world has entered the post-epidemic era since March. There are many rhetoric about China's manufacturing, China's export, and China's supply chain. Today, we will talk about the export trend of the pharmaceutical packaging industry after the epidemic from the perspective of a producer and an exporter.
As blister packaging materials with high barrier properties, PVC/PVDC film and cold form aluminum foil for pharmaceuticals are popular choices for pharmaceutical packaging materials. For the selection of materials, what factors need to be considered in order to protect the drug itself and be economical? Today we will briefly sort it out.
Cold-formed foils have been successfully used in pharmaceuticals, medical devices and in vitro diagnostics - point-of-care test kits for many years. The demand for cold-formed foils continues to grow and evolve as research scientists continue to create innovative solutions. Therefore, it is critical to have a good understanding of the specific requirements these foils need to meet, how to achieve the desired properties, and how requirements and material design affect the overall packaging design.
As a common packaging material on the market, blister packaging is widely used due to its superior barrier effect and independent packaging. But because blister packs are made of a complex combination of polymeric materials, including metal and plastic, recycling has been controversial. Can blister packs really be recycled?
As the popularity of vitamins and other health products continues to rise, health product manufacturers must ensure that their products are properly packaged to minimize consumption risks. But as a product in the middle of food and medicine, what are the specific packaging requirements for health care products?
8 Trends & Analysis of Packaging in Pharmaceutical Industry:The use of blister packs continues to grow,Pay more attention to child-resistant packaging,Plastic bottles are in the highest demand,Is sachet packaging out of date?,Increased use of prefilled syringes,Shelf impact and environmental protection become more important,Packaging design with patients first,Packaging focuses on consumer engagement
The blister packaging of tablets and capsules that end consumers buy from pharmacies or hospitals, is often printed with various text descriptions, drug names, dosages, or just the LOGO of the drug manufacturer on surface of aluminum foil. These printed products all look the same, but in fact it generally contains two common printing methods. Today we will discuss how to choose the most economical and applicable aluminum foil printing method from the perspective of pharmaceutical companies!   First, let's sort out how these two printing methods are distinguished. 1. We can start with structure. Unprinted medicinal aluminum foil is mainly composed of three parts: protective agent, aluminum foil, heat sealant (from outside to inside). The printed layer can appear on the outermost layer of the protective agent (ink, primer, aluminum foil, heat sealant), or between the protective agent and the aluminum foil (primer, ink, aluminum foil, heat sealant). 2. It can be divided from purchasing channels. If the source of purchase is a printing house/factory, then there is a 90% chance that the printed aluminum foil you purchase will be printed on the outermost layer. If it is directly purchased by the source manufacturer, it is usually printed on the middle layer.   Then another question arises, what are the pros and cons of these two printing methods? We also have a deep understanding of it from several angles. 1. The degree of wear resistance of printing. The aluminum foil printed on the outermost layer is less resistant to abrasion. During transportation, if bumped or scratched, the printed pattern on the surface will fall off to varying degrees. Therefore, in terms of printing durability, the aluminum foil printed between the protective agent and the aluminum foil (protective agent, ink, aluminum foil, heat sealant) is better. 2. Printing MOQ. For the packaging of new products, the initial quantity may be small, and the MOQ of pharmaceutical aluminum manufacturers is usually higher than that of printing factories, generally 200-500KG. The printing factory's MOQ is around 50-100KG. Therefore, for the selling price that requires small batch orders, the quantity of outer printing is more suitable for the initial purchase of new products. 3. The cost of printing products. Printing with low MOQ tends to have a higher unit price, and the purchase unit cost of printed matter will also increase. Therefore, for the purchase of printed medicinal aluminum foil, it is necessary to consider the finished product and sales volume, and choose the most suitable printing method.   If you have questions about printing medicinal foils or purchase concerns, you can consult us for professional advice.

Online Message

Ask about our products and prices, please leave your email, and we will contact you within 24 hours.

QR code scanning
Sweep, mobile station

Sweep, mobile station

Electronic business card

Electronic business card

Telephone

Address

Daqiao Industrial Park, Jiangdu, Yangzhou,China

Copyright:Yangzhou Jerel Pharmaceutical New Material Co., Ltd.  Powered by www.300.cn   苏ICP备13054439号-1